![]() ![]() Make sure that the TV set has been powered on and that the remote control points towards the TV set. Proceed as follows to search for the device code automatically (this example refers to programming a TV set). Press the EXIT button (23) multiple times until the remote control has returned to standard mode. To cancel the following programming at any time, press EXIT (23) to return without saving any changes. ![]() If your device is a VCR or a CD or DVD player, please also insert a tape or CD/DVD. This may take a very long time and should be used only if the above methods do not succeed. ![]() If the device fails to respond as desired, try the next device code from the list. After a few seconds, the display will return to the device code entry mode. Only for the device type AUX, a fifth digit must be entered to set the device code. If you mistyped the code, you have the chance to enter it again at this time. Universal Remote Control URC 1001 After you have entered the information, the first digit will blink again. Enter the four digits of the device code that you have found on the list. Search for the first available code by using the device type and manufacturer (see the list starting from page 97). Proceed as follows to enter the device codes directly (this example refers to programming a TV set). ![]() Universal Remote Control URC 1001 If the most important device functions work correctly, press the OK button (22) to save the setting. if the device fails to respond as desired, press the button (8) to recall the next available device code. The device is not for use in environments with a high temperature or humidity (e. Position the device on a stable, even surface and do not place any objects on the device. If you sell the device or pass it on, it is essential you hand over this manual also. Before you use this device for the first time, please read the following notes in this manual and heed all warnings, even if you are familiar with handling electronic devices. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |